You can not select more than 25 topics
			Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
		
		
		
		
		
			
		
			
				
					
					
						
							347 lines
						
					
					
						
							14 KiB
						
					
					
				
			
		
		
	
	
							347 lines
						
					
					
						
							14 KiB
						
					
					
				# We borrow heavily from the kernel build setup, though we are simpler since | 
						|
# we don't have Kconfig tweaking settings on us. | 
						|
 | 
						|
# The implicit make rules have it looking for RCS files, among other things. | 
						|
# We instead explicitly write all the rules we care about. | 
						|
# It's even quicker (saves ~200ms) to pass -r on the command line. | 
						|
MAKEFLAGS=-r | 
						|
 | 
						|
# The source directory tree. | 
						|
srcdir := .. | 
						|
abs_srcdir := $(abspath $(srcdir)) | 
						|
 | 
						|
# The name of the builddir. | 
						|
builddir_name ?= . | 
						|
 | 
						|
# The V=1 flag on command line makes us verbosely print command lines. | 
						|
ifdef V | 
						|
  quiet= | 
						|
else | 
						|
  quiet=quiet_ | 
						|
endif | 
						|
 | 
						|
# Specify BUILDTYPE=Release on the command line for a release build. | 
						|
BUILDTYPE ?= Release | 
						|
 | 
						|
# Directory all our build output goes into. | 
						|
# Note that this must be two directories beneath src/ for unit tests to pass, | 
						|
# as they reach into the src/ directory for data with relative paths. | 
						|
builddir ?= $(builddir_name)/$(BUILDTYPE) | 
						|
abs_builddir := $(abspath $(builddir)) | 
						|
depsdir := $(builddir)/.deps | 
						|
 | 
						|
# Object output directory. | 
						|
obj := $(builddir)/obj | 
						|
abs_obj := $(abspath $(obj)) | 
						|
 | 
						|
# We build up a list of every single one of the targets so we can slurp in the | 
						|
# generated dependency rule Makefiles in one pass. | 
						|
all_deps := | 
						|
 | 
						|
 | 
						|
 | 
						|
CC.target ?= $(CC) | 
						|
CFLAGS.target ?= $(CPPFLAGS) $(CFLAGS) | 
						|
CXX.target ?= $(CXX) | 
						|
CXXFLAGS.target ?= $(CPPFLAGS) $(CXXFLAGS) | 
						|
LINK.target ?= $(LINK) | 
						|
LDFLAGS.target ?= $(LDFLAGS) | 
						|
AR.target ?= $(AR) | 
						|
 | 
						|
# C++ apps need to be linked with g++. | 
						|
LINK ?= $(CXX.target) | 
						|
 | 
						|
# TODO(evan): move all cross-compilation logic to gyp-time so we don't need | 
						|
# to replicate this environment fallback in make as well. | 
						|
CC.host ?= gcc | 
						|
CFLAGS.host ?= $(CPPFLAGS_host) $(CFLAGS_host) | 
						|
CXX.host ?= g++ | 
						|
CXXFLAGS.host ?= $(CPPFLAGS_host) $(CXXFLAGS_host) | 
						|
LINK.host ?= $(CXX.host) | 
						|
LDFLAGS.host ?= $(LDFLAGS_host) | 
						|
AR.host ?= ar | 
						|
 | 
						|
# Define a dir function that can handle spaces. | 
						|
# http://www.gnu.org/software/make/manual/make.html#Syntax-of-Functions | 
						|
# "leading spaces cannot appear in the text of the first argument as written. | 
						|
# These characters can be put into the argument value by variable substitution." | 
						|
empty := | 
						|
space := $(empty) $(empty) | 
						|
 | 
						|
# http://stackoverflow.com/questions/1189781/using-make-dir-or-notdir-on-a-path-with-spaces | 
						|
replace_spaces = $(subst $(space),?,$1) | 
						|
unreplace_spaces = $(subst ?,$(space),$1) | 
						|
dirx = $(call unreplace_spaces,$(dir $(call replace_spaces,$1))) | 
						|
 | 
						|
# Flags to make gcc output dependency info.  Note that you need to be | 
						|
# careful here to use the flags that ccache and distcc can understand. | 
						|
# We write to a dep file on the side first and then rename at the end | 
						|
# so we can't end up with a broken dep file. | 
						|
depfile = $(depsdir)/$(call replace_spaces,$@).d | 
						|
DEPFLAGS = -MMD -MF $(depfile).raw | 
						|
 | 
						|
# We have to fixup the deps output in a few ways. | 
						|
# (1) the file output should mention the proper .o file. | 
						|
# ccache or distcc lose the path to the target, so we convert a rule of | 
						|
# the form: | 
						|
#   foobar.o: DEP1 DEP2 | 
						|
# into | 
						|
#   path/to/foobar.o: DEP1 DEP2 | 
						|
# (2) we want missing files not to cause us to fail to build. | 
						|
# We want to rewrite | 
						|
#   foobar.o: DEP1 DEP2 \ | 
						|
#               DEP3 | 
						|
# to | 
						|
#   DEP1: | 
						|
#   DEP2: | 
						|
#   DEP3: | 
						|
# so if the files are missing, they're just considered phony rules. | 
						|
# We have to do some pretty insane escaping to get those backslashes | 
						|
# and dollar signs past make, the shell, and sed at the same time. | 
						|
# Doesn't work with spaces, but that's fine: .d files have spaces in | 
						|
# their names replaced with other characters. | 
						|
define fixup_dep | 
						|
# The depfile may not exist if the input file didn't have any #includes. | 
						|
touch $(depfile).raw | 
						|
# Fixup path as in (1). | 
						|
sed -e "s|^$(notdir $@)|$@|" $(depfile).raw >> $(depfile) | 
						|
# Add extra rules as in (2). | 
						|
# We remove slashes and replace spaces with new lines; | 
						|
# remove blank lines; | 
						|
# delete the first line and append a colon to the remaining lines. | 
						|
sed -e 's|\\||' -e 'y| |\n|' $(depfile).raw |\ | 
						|
  grep -v '^$$'                             |\ | 
						|
  sed -e 1d -e 's|$$|:|'                     \ | 
						|
    >> $(depfile) | 
						|
rm $(depfile).raw | 
						|
endef | 
						|
 | 
						|
# Command definitions: | 
						|
# - cmd_foo is the actual command to run; | 
						|
# - quiet_cmd_foo is the brief-output summary of the command. | 
						|
 | 
						|
quiet_cmd_cc = CC($(TOOLSET)) $@ | 
						|
cmd_cc = $(CC.$(TOOLSET)) -o $@ $< $(GYP_CFLAGS) $(DEPFLAGS) $(CFLAGS.$(TOOLSET)) -c | 
						|
 | 
						|
quiet_cmd_cxx = CXX($(TOOLSET)) $@ | 
						|
cmd_cxx = $(CXX.$(TOOLSET)) -o $@ $< $(GYP_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c | 
						|
 | 
						|
quiet_cmd_objc = CXX($(TOOLSET)) $@ | 
						|
cmd_objc = $(CC.$(TOOLSET)) $(GYP_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $< | 
						|
 | 
						|
quiet_cmd_objcxx = CXX($(TOOLSET)) $@ | 
						|
cmd_objcxx = $(CXX.$(TOOLSET)) $(GYP_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $< | 
						|
 | 
						|
# Commands for precompiled header files. | 
						|
quiet_cmd_pch_c = CXX($(TOOLSET)) $@ | 
						|
cmd_pch_c = $(CC.$(TOOLSET)) $(GYP_PCH_CFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $< | 
						|
quiet_cmd_pch_cc = CXX($(TOOLSET)) $@ | 
						|
cmd_pch_cc = $(CC.$(TOOLSET)) $(GYP_PCH_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $< | 
						|
quiet_cmd_pch_m = CXX($(TOOLSET)) $@ | 
						|
cmd_pch_m = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $< | 
						|
quiet_cmd_pch_mm = CXX($(TOOLSET)) $@ | 
						|
cmd_pch_mm = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $< | 
						|
 | 
						|
# gyp-mac-tool is written next to the root Makefile by gyp. | 
						|
# Use $(4) for the command, since $(2) and $(3) are used as flag by do_cmd | 
						|
# already. | 
						|
quiet_cmd_mac_tool = MACTOOL $(4) $< | 
						|
cmd_mac_tool = ./gyp-mac-tool $(4) $< "$@" | 
						|
 | 
						|
quiet_cmd_mac_package_framework = PACKAGE FRAMEWORK $@ | 
						|
cmd_mac_package_framework = ./gyp-mac-tool package-framework "$@" $(4) | 
						|
 | 
						|
quiet_cmd_infoplist = INFOPLIST $@ | 
						|
cmd_infoplist = $(CC.$(TOOLSET)) -E -P -Wno-trigraphs -x c $(INFOPLIST_DEFINES) "$<" -o "$@" | 
						|
 | 
						|
quiet_cmd_touch = TOUCH $@ | 
						|
cmd_touch = touch $@ | 
						|
 | 
						|
quiet_cmd_copy = COPY $@ | 
						|
# send stderr to /dev/null to ignore messages when linking directories. | 
						|
cmd_copy = ln -f "$<" "$@" 2>/dev/null || (rm -rf "$@" && cp -af "$<" "$@") | 
						|
 | 
						|
quiet_cmd_alink = LIBTOOL-STATIC $@ | 
						|
cmd_alink = rm -f $@ && ./gyp-mac-tool filter-libtool libtool $(GYP_LIBTOOLFLAGS) -static -o $@ $(filter %.o,$^) | 
						|
 | 
						|
quiet_cmd_link = LINK($(TOOLSET)) $@ | 
						|
cmd_link = $(LINK.$(TOOLSET)) $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS) | 
						|
 | 
						|
quiet_cmd_solink = SOLINK($(TOOLSET)) $@ | 
						|
cmd_solink = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS) | 
						|
 | 
						|
quiet_cmd_solink_module = SOLINK_MODULE($(TOOLSET)) $@ | 
						|
cmd_solink_module = $(LINK.$(TOOLSET)) -bundle $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o $@ $(filter-out FORCE_DO_CMD, $^) $(LIBS) | 
						|
 | 
						|
 | 
						|
# Define an escape_quotes function to escape single quotes. | 
						|
# This allows us to handle quotes properly as long as we always use | 
						|
# use single quotes and escape_quotes. | 
						|
escape_quotes = $(subst ','\'',$(1)) | 
						|
# This comment is here just to include a ' to unconfuse syntax highlighting. | 
						|
# Define an escape_vars function to escape '$' variable syntax. | 
						|
# This allows us to read/write command lines with shell variables (e.g. | 
						|
# $LD_LIBRARY_PATH), without triggering make substitution. | 
						|
escape_vars = $(subst $$,$$$$,$(1)) | 
						|
# Helper that expands to a shell command to echo a string exactly as it is in | 
						|
# make. This uses printf instead of echo because printf's behaviour with respect | 
						|
# to escape sequences is more portable than echo's across different shells | 
						|
# (e.g., dash, bash). | 
						|
exact_echo = printf '%s\n' '$(call escape_quotes,$(1))' | 
						|
 | 
						|
# Helper to compare the command we're about to run against the command | 
						|
# we logged the last time we ran the command.  Produces an empty | 
						|
# string (false) when the commands match. | 
						|
# Tricky point: Make has no string-equality test function. | 
						|
# The kernel uses the following, but it seems like it would have false | 
						|
# positives, where one string reordered its arguments. | 
						|
#   arg_check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \ | 
						|
#                       $(filter-out $(cmd_$@), $(cmd_$(1)))) | 
						|
# We instead substitute each for the empty string into the other, and | 
						|
# say they're equal if both substitutions produce the empty string. | 
						|
# .d files contain ? instead of spaces, take that into account. | 
						|
command_changed = $(or $(subst $(cmd_$(1)),,$(cmd_$(call replace_spaces,$@))),\ | 
						|
                       $(subst $(cmd_$(call replace_spaces,$@)),,$(cmd_$(1)))) | 
						|
 | 
						|
# Helper that is non-empty when a prerequisite changes. | 
						|
# Normally make does this implicitly, but we force rules to always run | 
						|
# so we can check their command lines. | 
						|
#   $? -- new prerequisites | 
						|
#   $| -- order-only dependencies | 
						|
prereq_changed = $(filter-out FORCE_DO_CMD,$(filter-out $|,$?)) | 
						|
 | 
						|
# Helper that executes all postbuilds until one fails. | 
						|
define do_postbuilds | 
						|
  @E=0;\ | 
						|
  for p in $(POSTBUILDS); do\ | 
						|
    eval $$p;\ | 
						|
    E=$$?;\ | 
						|
    if [ $$E -ne 0 ]; then\ | 
						|
      break;\ | 
						|
    fi;\ | 
						|
  done;\ | 
						|
  if [ $$E -ne 0 ]; then\ | 
						|
    rm -rf "$@";\ | 
						|
    exit $$E;\ | 
						|
  fi | 
						|
endef | 
						|
 | 
						|
# do_cmd: run a command via the above cmd_foo names, if necessary. | 
						|
# Should always run for a given target to handle command-line changes. | 
						|
# Second argument, if non-zero, makes it do asm/C/C++ dependency munging. | 
						|
# Third argument, if non-zero, makes it do POSTBUILDS processing. | 
						|
# Note: We intentionally do NOT call dirx for depfile, since it contains ? for | 
						|
# spaces already and dirx strips the ? characters. | 
						|
define do_cmd | 
						|
$(if $(or $(command_changed),$(prereq_changed)), | 
						|
  @$(call exact_echo,  $($(quiet)cmd_$(1))) | 
						|
  @mkdir -p "$(call dirx,$@)" "$(dir $(depfile))" | 
						|
  $(if $(findstring flock,$(word 2,$(cmd_$1))), | 
						|
    @$(cmd_$(1)) | 
						|
    @echo "  $(quiet_cmd_$(1)): Finished", | 
						|
    @$(cmd_$(1)) | 
						|
  ) | 
						|
  @$(call exact_echo,$(call escape_vars,cmd_$(call replace_spaces,$@) := $(cmd_$(1)))) > $(depfile) | 
						|
  @$(if $(2),$(fixup_dep)) | 
						|
  $(if $(and $(3), $(POSTBUILDS)), | 
						|
    $(call do_postbuilds) | 
						|
  ) | 
						|
) | 
						|
endef | 
						|
 | 
						|
# Declare the "all" target first so it is the default, | 
						|
# even though we don't have the deps yet. | 
						|
.PHONY: all | 
						|
all: | 
						|
 | 
						|
# make looks for ways to re-generate included makefiles, but in our case, we | 
						|
# don't have a direct way. Explicitly telling make that it has nothing to do | 
						|
# for them makes it go faster. | 
						|
%.d: ; | 
						|
 | 
						|
# Use FORCE_DO_CMD to force a target to run.  Should be coupled with | 
						|
# do_cmd. | 
						|
.PHONY: FORCE_DO_CMD | 
						|
FORCE_DO_CMD: | 
						|
 | 
						|
TOOLSET := target | 
						|
# Suffix rules, putting all outputs into $(obj). | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.c FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cc FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cxx FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.m FORCE_DO_CMD | 
						|
	@$(call do_cmd,objc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.mm FORCE_DO_CMD | 
						|
	@$(call do_cmd,objcxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.s FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(srcdir)/%.S FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
 | 
						|
# Try building from generated source, too. | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cc FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cxx FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.m FORCE_DO_CMD | 
						|
	@$(call do_cmd,objc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.mm FORCE_DO_CMD | 
						|
	@$(call do_cmd,objcxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.s FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.S FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
 | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.c FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.cc FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.cpp FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.cxx FORCE_DO_CMD | 
						|
	@$(call do_cmd,cxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.m FORCE_DO_CMD | 
						|
	@$(call do_cmd,objc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.mm FORCE_DO_CMD | 
						|
	@$(call do_cmd,objcxx,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.s FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
$(obj).$(TOOLSET)/%.o: $(obj)/%.S FORCE_DO_CMD | 
						|
	@$(call do_cmd,cc,1) | 
						|
 | 
						|
 | 
						|
ifeq ($(strip $(foreach prefix,$(NO_LOAD),\ | 
						|
    $(findstring $(join ^,$(prefix)),\ | 
						|
                 $(join ^,binding.target.mk)))),) | 
						|
  include binding.target.mk | 
						|
endif | 
						|
ifeq ($(strip $(foreach prefix,$(NO_LOAD),\ | 
						|
    $(findstring $(join ^,$(prefix)),\ | 
						|
                 $(join ^,src/libsass.target.mk)))),) | 
						|
  include src/libsass.target.mk | 
						|
endif | 
						|
 | 
						|
quiet_cmd_regen_makefile = ACTION Regenerating $@ | 
						|
cmd_regen_makefile = cd $(srcdir); /Users/mahdi/Documents/work/programming/barnameNegar/arbaeenWebApp/node_modules/node-gyp/gyp/gyp_main.py -fmake --ignore-environment "-Dlibrary=shared_library" "-Dvisibility=default" "-Dnode_root_dir=/Users/mahdi/Library/Caches/node-gyp/16.14.2" "-Dnode_gyp_dir=/Users/mahdi/Documents/work/programming/barnameNegar/arbaeenWebApp/node_modules/node-gyp" "-Dnode_lib_file=/Users/mahdi/Library/Caches/node-gyp/16.14.2/<(target_arch)/node.lib" "-Dmodule_root_dir=/Users/mahdi/Documents/work/programming/barnameNegar/arbaeenWebApp/node_modules/node-sass" "-Dnode_engine=v8" "--depth=." "-Goutput_dir=." "--generator-output=build" -I/Users/mahdi/Documents/work/programming/barnameNegar/arbaeenWebApp/node_modules/node-sass/build/config.gypi -I/Users/mahdi/Documents/work/programming/barnameNegar/arbaeenWebApp/node_modules/node-gyp/addon.gypi -I/Users/mahdi/Library/Caches/node-gyp/16.14.2/include/node/common.gypi "--toplevel-dir=." binding.gyp | 
						|
Makefile: $(srcdir)/build/config.gypi $(srcdir)/../node-gyp/addon.gypi $(srcdir)/src/libsass.gyp $(srcdir)/binding.gyp $(srcdir)/../../../../../../../Library/Caches/node-gyp/16.14.2/include/node/common.gypi | 
						|
	$(call do_cmd,regen_makefile) | 
						|
 | 
						|
# "all" is a concatenation of the "all" targets from all the included | 
						|
# sub-makefiles. This is just here to clarify. | 
						|
all: | 
						|
 | 
						|
# Add in dependency-tracking rules.  $(all_deps) is the list of every single | 
						|
# target in our tree. Only consider the ones with .d (dependency) info: | 
						|
d_files := $(wildcard $(foreach f,$(all_deps),$(depsdir)/$(f).d)) | 
						|
ifneq ($(d_files),) | 
						|
  include $(d_files) | 
						|
endif
 | 
						|
 |